Scavenging and aeration in the oil pan have been identified as a problem in 996 and Boxster models experiencing high g-forces on the racetrack. This oil pan spacer provides a simple solution. This spacer increases sump capacity by half a liter, providing more reserve to ward off starvation. Thisoil pan spacer clears all factory options including the rear skid plate. Added oil capacities as well as increased oil pan surface area increase oil cooling and engine performance. *oil pan and sump baffle are OEM parts and do not need to be purchased material: 6061 t6 aluminum alloy finish: clear anodized weight: n/a models: Boxster, Boxster s, and 996 models (excludes GT3 and turbocharged models) installation: for best...(choose a part on the right to read more)

The moshammer front fender set blends just the right amount of motorsport pedigree with functionality. This aggressive design is captivating on any 991 model and offers a level of exclusivity not found with competitors body kits. The integrated fender vents lower the thermal load on the brakes by allowing the heat to be quickly ventilated up and out of the wheel arch. This composite fender set has been meticulously designed to bolt up to the factory locations for perfect panel fitment, alignment and consistent gaps. A perfect addition for a leased vehicle or for those looking to return the car to its original appearance in the future. These fenders complement the entire moshammer stormforce (991.1) / stormforce...(choose a part on the right to read more)

K24/26 exchange turbo (only OEM k24 exchange accepted) (up to 700 hp) power is focused on mid and top range rpm's. Facts: - modified compressor housing and backing plate - modified & lightened high flow compressor wheels. - remanufactured by kkk / borg warner certified technicians - free software update for those already running FVD software. FVD brombachers 996 k24/26 race turbos are new units created for those who are looking for ultimate in performance. Power is focused in the mid and top rpm range while keeping turbo lag low. They are completely bolt on and do not require custom headers or special modifications. The factory OEM turbocharger compressor housing is re-profiled and the compressor backing plate...(choose a part on the right to read more)

The moshammer vented rear diffuser with fins is an aggressive design that reduces aerodynamic drag. This vented diffuser allows air that is trapped by the rear bumper to exit, allowing for greater top end performance. The design also incorporates 5 fins that improve laminar airflow by reducing turbulence. Moshammer manufactured this as a direct replacement, so it secures seamlessly to the factory locations with the original hardware. This is an ideal addition for a leased vehicle or for those looking to return the car to its original appearance in the future. When added to other elements of the evo rs (991.2 turbo/s) package, the result is a confident, cohesive stance with balanced downforce. Features: vented f...(choose a part on the right to read more)

Best compound for endurance racing on the basis of the rs14. A slight reduction of the friction value improves the modulation (controllability). Nevertheless, the friction value is enough for cars without power-assisted brake system and ensures comfortable low effort on the brake pedal. Constant temperatures up to 600 deg. C (1,100 deg. F) are possible. The combination of friction value, fading stability and low wear rates on pads and discs (rotors) realised with this material is unmatched up to now. Due to its excellent release characteristics and controllability fits Porsche:
993 3.6 turbo & turbo GT2
993 3.8 Carrera rs & rsr
993 GT2 & rsr (380 disc)

General Fitment

High friction racing compound with high content of ceramic materials, fade resistance up to 700 deg. C (1,300 deg. F). It combines a 20% higher friction value than the rs14 with a slightly increased pad wear. Although the rs15 has a good controllability and release characteristic it needs finesse to avoid over braking the car, especially with lightweight cars or cars with boosted brakes. Applications: touring cars, rally cars (tarmac), GT cars, wsc, high down-force single-seaters, nascar.

Fits Porsche:
993 3.6 turbo & turbo GT2
993 3.8 Carrera rs & rsr
993 GT2 & rsr (380 disc)

General Fitment

24 required.
Known as: o-ring / sealing ring / gasket guide tube

View/Change Diagram

356 1950-59 - Engine	356 1950-59 - Engine
356 1950-59 - Engine	356 1960-65 - Engine
356 1960-65 - Engine	356 1960-65 - Engine
356 1960-65 - Engine	911 1970-73 - Engine
911 1970-73 - Engine	911 1974-77 - Engine
911 1974-77 - Engine	911 1974-77 - Engine
911 1978-83 - Engine	911 1978-83 - Engine
911 1978-83 - Engine	911 1984-86 - Engine
911 1984-86 - Engine	911 1984-86 - Engine

Note: this brand is red silicone material.

View/Change Diagram

911 1974-77 - Engine	911 1974-77 - Engine
911 1974-77 - Engine	911 1978-83 - Engine
911 1978-83 - Engine	911 1978-83 - Engine
911 1978-83 - Engine	911 1978-83 - Engine
911 1984-86 - Engine	911 1984-86 - Engine
911 1984-86 - Engine	911 1984-86 - Engine
911 1987-89 - Engine	911 1987-89 - Engine
911 1987-89 - Engine	911 1987-89 - Engine
930 1975-77 - Engine	930 1975-77 - Engine

Hp plus brake pad compound is ideal for autocross and track day drivers looking for a high performance race compound that can take the heat of the track and get you home safely without having to change the pads. Hp plus utilizes a unique ferro-carbon, high-tech friction material that was developed and manufactured for sport driving in autocross, solo ii and “track day” applications. The ferro-carbon formulation offers lower wear rates and higher torque values than other competitive materials. All hawk hp plus / autocross brake pads provide a limited lifetime warranty, ensuring products to be free of defects from manufacturer’s workmanship and materials.

General Fitment

Californian mirror sleek design! This is the ultimate in aerodynamic mirrors with state-of-the-art vitaloni technology. Will withstand racing windspeeds. Passenger side includes a panoramic wide angle lense for added safety. Driver side is flat.

General Fitment

Hps - high performance street disc brake pads are world renowned for increasing stopping power on your street legal vehicle. Hps pads offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you will have a highly durable brake pad with less brake dust. All hawk performance street brake pads provide a limited lifetime warranty, ensuring products to be free of defects from manufacturer’s workmanship and materials.

General Fitment

Our custom-fit car covers fit your Porsche like a glove! Car covers are an excellent and inexpensive way to preserve your Porsche. Durable, woven poly cotton blend offers good basic vehicle protection. Polyester is sun and water resistant, while cotton give a soft touch to the vehicle’s finish. When ordering, please indicate your year, make, model, number of side mirrors, regular or turbo or turbo-look body style, with or without whale tail spoiler, and which type cover you would like. These covers are made to order and will take longer to ship.

When ordering, make sure you indicate year, model, body style, number of exterior side mirrors, and with or without rear spoiler. This part is made to order and t...(choose a part on the right to read more)

General Fitment

Italian momo shift knobs are the finest accessories your could add to your Porsche. Made from the finest materials- leather, wood, or metal- these shift knobs add that extra accent and are shaped to be pleasing to the hand as you row through the gears. All knobs are universal designs that fit your Porsche perfectly. Leather and metal. Order the matching nero steering wheel for the full effect (part number rmb3519).

Note: 924/944/968 models need knob adaptor (part r912690). 928 models need knob adaptor (part r912665)
Fits all Porsche models; 914, 944, 9442, 911, 912, 996, Boxster, 986, 987, 997, 996t, turbo, 930, 356, 924, 968, 928, Cayman, Cayenne

General Fitment

The zimmermann OEM brake disc combines high-quality cast materials, a vented and perforated braking surface and includes z-coating. Features: better wet braking performance by permanent expulsion of brake dust and water. Sporty look. Anti corrosion "z-coating" prevents rust. Noticeable improvement in braking performance. Countersunk holes double as wear indicator. Simple bolt on, modifications are not necessary. Sold individually. 1 necessary per car. Rotors should always be changed in pairs; the front right is part # 93035104803eq please note: if you are looking for a kit with pads, etc. Please check our brake service kit selection.

This item may need to be sourced from Germany and would take 2-4 weeks to...(choose a part on the right to read more)

The pss 10 suspension kit provides the ultimate in performance tuning. The fully adjustable monotube gas shock absorbers offer a selection of nine precise compression and rebound settings. The front and rear progressive rate springs allow accurate adjustment of the vehicle ride height and center of gravity for the level of performance you seek. Handling and control are just a few twists away.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

This is an original replacement door panel that is a perfect reproduction made in Germany. Features: period correct material with the correct graining water resistant fiberboard base layer of sound absorption foam perforations are die cut for superior fitment made in Germany sold individually. 1 necessary per car. If you would like a set, the passengers side is part # 993555032700eq

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

FVD "brombacher" sound version exhaust system for 964 89-94

- + 25 crank hp & + 19 crank torque
- 200 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 66 lbs. (29,9 kg)
- t 316 stainless steel for improved durability over t 304
- 1 x 3.5"(90mm) oval tip
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.


FVD is proud to introduce our newest line of Brombacherexhaust systems. Brombacher exhausts are engineered for the discerning Porsche owner and offer unmatched performance, unparalleled qualit...(choose a part on the right to read more)

General Fitment

The zimmermann OEM brake disc combines high-quality cast materials, a vented and perforated braking surface and includes z-coating. Features: better wet braking performance by permanent expulsion of brake dust and water. Sporty look. Anti corrosion "z-coating" prevents rust. Noticeable improvement in braking performance. Countersunk holes double as wear indicator. Simple bolt on, modifications are not necessary. Sold individually. 1 necessary per car. Rotors should always be changed in pairs; the front left is part # 93035104703eq please note: if you are looking for a kit with pads, etc. Please check our brake service kit selection.

This item may need to be sourced from Germany and would take 2-4 weeks to ...(choose a part on the right to read more)

We are committed to Porsche cars and are very happy to release an outer tie rod that consists of a monoball joint. Until now this was something that was really only available on racing models. Our tie rod will provide you with unequalled steering precision for street and track use. This component is manufactured in europe and contains the finest materials available, high carbon steel and 7075 t6 aluminum. Installation is seamless, this is a direct replacement for the OEM part number, 965 347 032 00. Sold individually. 2 needed per car. We also suggest replacing your inner tie rod, we have a uniball option, our part # 96434705805sp (qty. 1 is needed) and now is also a good time to replace your worn out inner tie...(choose a part on the right to read more)

Replace dirty, torn headliners to give your vehicle a new appearance. We’ve selected a fine domestic, original-style perforated material for coupes. The coupe models are perforated and come complete with side post sections.

Please indicate model, year, body style, and with or without sunroof when ordering.

General Fitment

Replace dirty, torn headliners to give your vehicle a new appearance. We’ve selected a fine domestic, original-style perforated material for coupes. The coupe models are perforated and come complete with side post sections.

Please indicate model, year, body style, and with or without sunroof when ordering.

General Fitment

Replace dirty, torn headliners to give your vehicle a new appearance. We’ve selected a fine domestic, original-style perforated material for coupes. The coupe models are perforated and come complete with side post sections.

Please indicate model, year, body style, and with or without sunroof when ordering.

General Fitment

Perfect muffler for those looking for a more aggressive exhaust note without changing the factory catalytic converters. The added benefit is you can reuse your OEM catalytic converters for emissions purposes. + 15 hp & + 12 torque - reuses OEM cats, perfect for those concerned about warranty. - open muffler design for added power. - tubing diameter is the same as the OEM system. - weighs 19 lbs. (8,6 kg) - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - 4 on a scale of 1-10 in volume (1 being stock) below 3,000 rpms, 6 on a scale of 1-10 in volume under maximum load (3 being stock). - includes cone and v band style hardware to prevent exhaust leaks. - made in Germany. - modular desi...(choose a part on the right to read more)

FVD "brombacher" titan sound version exhaust system for 964 89-94

- + 25 crank hp & + 19 crank torque
- 100 cell high flow, tri metal German hjs sport catalysts
- 2 3/4" tubing (70mm) straight through design for max. Power
- weighs 42 lbs. (19,3 kg)
- material: titan
- 2 x 3.5"(90mm) oval tips
- includes flexible heating tube
- made in Germany
- no dme programming necessary. No check engine light.
- intoxicating growl at idle, partial throttle and wide open throttle.

Brombacher mufflers outer shell dampens and eliminates unwanted frequencies and ensures no resonance or drone in the cabin. The end result is a strong, linear, firing-order dominated flat-6 Porsche® sound. In addition, bromb...(choose a part on the right to read more)

General Fitment

+ 15 hp & + 14 torque - 200 cell high flow, tri metal German hjs "hd" high durability matrix sports catalysts. - can be used with FVD "brombacher" mufflers. - weighs 15.5 lbs. (7.0 kg). - German v2a - x5crni18-10 - 1.4301 stainless steel for improved durability. - made in Germany. - intoxicating growl at idle, partial throttle and wide open throttle. The catalytic converter cores used in this system are the most advanced in the industry. They are produced by hjs in Germany and are a 200 cpsi (cell per square inch) tri-metal design. Tri-metal cats are the freest flowing and environmentally friendly aftermarket cats produced today. Tri-metal catalytic converters are rodium, platinum and iridium coated and per...(choose a part on the right to read more)